Water/Moisture Sensor (INSTEON Compatible)

Water/Moisture Sensor (INSTEON Compatible)

model WS11 by Minotaur Engineering

protocols INSTEON

Be the first to review this product

Clearance item. One left. Price has been slashed!

This Minotaur Engineering branded INSTEON Water/Moisture Sensor can detect moisture on any non-conductive surface and send a signal to Indigo or any INSTEON linked device in range of the I/O Linc (not included).

Availability: In stock

Only 1 left

Regular Price: $48.00

Special Price: $15.99

Sensor detects moisture or leaks using 2 probes.

Basic Information

You can catch leaks as soon as they start with a water-sensor system that triggers an I/O Linc to communicate to your Indigo/INSTEON system and subsequently alerts you via flashing a lamp or even emailing you on your iPhone. The Water/ Moisture Sensor connects to the I/O Linc unit via three leads on a 5-foot cable. The sensor should be placed such that the two probes firmly touch the surface to be protected. It is recommended that you use the enclosed self adhesive wire tie and holder to correctly position the sensor and hold it in place. Care should be taken such that the sensor is in a position so that if moisture occurs in the area, it does not "run" or drip away from the sensor. After installation, placing the sensor on a wet washcloth should trigger the unit and allow you to test the system.


  • Manufacturer of Sensor: Minotaur Engineering
  • Cord length: 5 feet (approx)
  • Dimensions: 1 5/16" diameter x 1 1/4" H

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.