Z-Wave Aeon Range Extender and Repeater

Aeotec Z-Wave Range Extender / Repeater

model DSD37-ZWUS by AEON Labs Aeotec

protocols Z-Wave

Be the first to review this product

Perfect supplement to your Z-Wave Network! This compact (1.75" x 1.75" x .875") plug in device repeats and amplifies Z-Wave signals — that is, it extends the range of your Z-Wave network.

Availability: In stock


Covering weak areas and black spots, the Range Extender has been especially designed to listen for relevant Z-Wave signals, to intercept them, and then to repeat and amplifies them back out to other Z-Wave devices in your network. And — it also supports beaming.

Monitoring your network, this Aeon Range Extender and Repeater receives both weak Z-Wave signals and the signals that will be weak once they reach their destination, and it amplifies them before sending them back to the network. All happening in milliseconds and not causing any delay to your network, Range Extender helps improve the reliability and accuracy of your Z-Wave setup.

Simple Setup using your Z-Stick

  1. Decide on where you want your Range Extender and Repeater to be placed, plug it in, and turn the power outlet on. lts LED will begin to blink.
  2. lf your Z-Stick is plugged into a USB port, unplug it.
  3. Take your Z-Stick to your Range Extender and Repeater.
  4. Press the Z Wave Button on your Z-Stick.
  5. Press the Z-Wave Button on your Range Extender and Repeater . lf your Range Extender and Repeater has been successfully linked to your network, its LED will no longer blink. lf the linking was unsuccessful, the LED will continue to blink.
  6. Press the Z-Wave Button on the Z-Stick to exit inclusion mode.

Outlet Friendly

It's been designed to be as small (1.75" x 1.75" x .875") and as compact as possible so that it doesn't block neighboring power outlets.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.