0.10.02

New version down below that restores cloud mapping data, and add favorites mapping data download from cloud AWS.

Other libraries haven't figured this out yet, but a bit of reverse proxy/man-in-middle enabled discovery of changes to cloud location. Updated , also found favorites data - and have added this as a separate action group! Favorites is far more useful in my mind, and at each request re-check the favourite based on ID. Essentially meaning you can update favourite and this new update will be applied when run.

Changes:

Fix AWS Server authorization for access to mapping data once again. Redo end-points.

Download and parse Favorites per Robot via cloud connection, saving to file for future use. (.10.0.02 - update, loads file after creation so immediately available for use) eg. Same as Room data - can download once and then disable internet if preference. Add Action Group for 'Favourites'. Enables to select a Favourite set of rooms, cleaning aspects for each iRoomba

Add refill Tank messaging (missing)

With Latest iRobot App / Android APK App as source - update all messaging relating to error and not ready states.

Update Logging to Log and File as seperate instances. (my usual log approach)

Fix for Json notification messaging load error. (created by updates to 10.01.01)

Update logging - try to clearly state that device connected without to much messaging.

0.9.37

Fix paho-mqtt 1.6.1 until breaking changes in new >2 version can be managed New release number because of earlier quick fix

0.9.35

Indigo 2023.2. API 3.4 version onwards

Let Indigo install library dependency (paho-mqtt)

Some minor changes:Better- Catch bad Json message - without exception

0.9.20

Update password getting for local use

Recommend using irobot account details for inital password getting. Overcomes timing of button presses

0.9.19

Move configuration files and mapping data to Indigo Preferences directory Moves existing Documents files over if exists and should just update without issue Should remove any folder Access needed for plugin

0.9.18

Fix for python3 update and get icloud password.

0.9.17

Python 3 Bug Fixes.. more widespread than imagined.. Sorry SSL issue, byte socket issues, get password issues Obviously slipped through the high level of quality control (Least updated in record time) Hopefully no more...

0.9.16

More bug fixes.. Hopefully getting there

0.9.15

Bug fix - for config dialog <= to integer python3

Python 3 Version For Indigo 2022.1+ only

0.9.4

Shortened the included iroomba english data Add parsing of messages - should immediately update status on all events (not just every 60 seconds)

0.9.3 Decompiled the iroomba android app and added all NotReady and all Error codes; including it would seem for mower! Read the json file completely and use this to create a new errorNotReady state: This is a error/Not Ready sentence specifically using the error code and what the iroomba app says. Strings.xml file included (not used) from android app Changed statement when battery 100% to Fully Charged.

0.9.2 Remove allRoomba check on start of every device. Was a bit overkill. Format all Lifetime numbers as readable number = eg. 3,200 & make string. Add Not Ready states as reported = States 39 & 68 (welcome to report more and can add) Add State lastMission - reports the last Mission time Mission run, uses same datetime formatting as plugin Config Reorder NotReady and Error messages; Error Message will outrank Not Ready for summary CurrentState display

0.9.1 Some change to currentState_Statment shorten mission time add battery percent

0.9.0 Change connection & reconnection to threaded events to avoid hang if one device unavailable/unstable as I recent found Modifications to currentState_statement - more information Add Datetime modification to Plugin Config. Change this to change the Mission/Recharge datetimes format to Sun 2:04PM to 02/2/2021 02:23:22 see examples or webpage link

0.8.9 Add currentState_statement state: Aiming to describe what is happening in sentence for control pages eg. Charging, restarting Mission in 48 minutes Error etc. Ideally replacing status in control pages...

0.8.6 Change Lifetime Runtime to English string weeks,days,minutes etc Add Mission Duration state in minutes Add LifeTimeCleaningJobs run state Add LifeTime Area Cleaned in M2 and Sqft Slight changes to status info; update midMsn state

0.8.5 Add Lifetime Runtime state Hours, Minutes Add Mission Started Date time state Fix RechargeMinutes remaining for later models - had to calculate. Change to a number to allow triggering with greater than/equal to etc. Add Recharge Finish Date stamp as a stamp

0.8.4

remove openSSL import unneeded statement

0.8.1

Creates Variable with Current Status of Each iRoomba Device for use in Virtual Devices Status eg. Virtual Device for Clean Kitchen - set ON for Action Group Clean Kitchen, OFF - Dock Status updates - select the variable for that device from variable == "Alexa, Turn on Clean the Kitchen" Converts each iRoomba to a Relay device with ON/OFF/Toggles - means more compatible with HomeKit/Alexa

THIS VERSION REMOVES OpenSSL libraries; this removes support for OSX versions lower than High Sierra (TLS old version problem) This removal is needed to support ongoing functions moving forward, if you are running an old version of OSX stick with 0.7.5 below

(0.8.1 Bug Fix, 0.8.3 Change variable to True/False)

0.7.5

Few Logging changes Couple of rare bug fixes

Add: Save Last Command from Roomba (as Action Group) Enables you to copy the last run command from the App and save it as a Action Group Enables Room, selective cleaning support for those iRoombas that allow this Example: From App Start cleaning on one or more rooms Go to Indigo, Create New Action Group, iRoomba Actions, Save Last Command Select iRoomba Device, press button and save. This command is now saved and accessible now and into the future (if you change maps etc may need to be redone)

0.7.2

Move to IP Address to differentiate iRoombas Few bug fixes for connect/disconnect - hopefully starting up with needing restart Add IP address as Device State as well for CP use Default to forceSSL checkbox True - think needed for all versions now Add Debug Log Menu Item for troubleshooting down the track

0.6.0 -0 .7.2

Summary of few updates summarised below: Prior 0.6.0 - Adds SSL libraries to the plugin to bypass any issues with older versions of IOS

& 0.6.0 onwards

• Updates code base to continuous connection for 1-100 iRoombas
• Should fully support multiple iRoomba devices; almost continuous updates and immediate actions
• Rewrite of Get Password code - moves to threaded; avoids UI Timeout errors
  • seems to be much less of a pain to get password
  • if iRoomba correctly makes noise and password fails for whatever reason, just press Get Password button again. Doesn't appear to need to press iRoomba button combo again.
• Adds IP Address of iRoomba to Device State
• Add MAC Address of iRoomba to Device Custom State
• Add Menu Item - Debug Log Output for issues for posting.
• Adds ability to update Roombas name from within Device Edit Box (only if name changed). Can rerun Get Password if needed but this update box obviously much easier.
• Adds Further Debug Log check box
• Updates to Plugin Config Menu - remove most options as all continuously connected

Note: Occasionally after updating from github find get security alert from Big Sur and need to then run Terminal Command below: (change for version of Indigo - this example 7.5) sudo xattr -rd com.apple.quarantine /Library/Application\ Support/Perceptive\ Automation/Indigo\ 7.5/Plugins

0.6.0 -0 .7.2

Summary of few updates summarised below: Prior 0.6.0 - Adds SSL libraries to the plugin to bypass any issues with older versions of IOS

& 0.6.0 onwards

• Updates code base to continuous connection for 1-100 iRoombas
• Should fully support multiple iRoomba devices; almost continuous updates and immediate actions
• Rewrite of Get Password code - moves to threaded; avoids UI Timeout errors
  • seems to be much less of a pain to get password
  • if iRoomba correctly makes noise and password fails for whatever reason, just press Get Password button again. Doesn't appear to need to press iRoomba button combo again.
• Adds IP Address of iRoomba to Device State
• Add MAC Address of iRoomba to Device Custom State
• Add Menu Item - Debug Log Output for issues for posting.
• Adds ability to update Roombas name from within Device Edit Box (only if name changed). Can rerun Get Password if needed but this update box obviously much easier.
• Adds Further Debug Log check box
• Updates to Plugin Config Menu - remove most options as all continuously connected

Note: Occasionally after updating from github find get security alert from Big Sur and need to then run Terminal Command below: (change for version of Indigo - this example 7.5) sudo xattr -rd com.apple.quarantine /Library/Application\ Support/Perceptive\ Automation/Indigo\ 7.5/Plugins

Plus: Soon to have 2 iRoombas to test more thoroughly on... Until then will leave this release here But please report any issues...

iRoomba Pluging

Add support for iRoomba S9/S9+ Changes to some debug logging (less verbose) Add Software Version Status item (first used in getPassword) Force SSL usage (advanced option) to Device Config

0.4.0

Remove update code for Indigo 7.2 Fix for BinFull not updating appropriately

0.3.3

Adds better logging for getPassword section (no longer debug logging only Name change on PluginStore

0.3.2

Bug fix for new firmware/changes primarily for getting password for new device More debug logging

0.3.1

Support for new line of iRoomba i7 robots

0.2.6

Add better Logging to debug log Add Plugin Store Menu item (moving to this for updating) Better error messaging if missing modules/not installed Better messaging if iRoomba not connectable (normally means have lost charge somewhere)

FIx for action error if not running continuous mode Better handling actions if no connection possible/exists Update Plugin Config to remind that continuous connection preferred method

0.2.3 Added a Action for Toggle Cleaning. Start or Stops and Docks iroomba depending on current cleaning phase. (only useful if using continuous connection)

Updated documentation Less error logging for expected conditions/events (now debug)

Proper fix for restart issue (missed the full Stop)

Plugin Store Bug fix for restart error given name change

PluginStore Release

Indigo 7 Only Needs paho-mqtt python library installed. In terminal Window pip install paho-mqtt