Hue Lights  

Developer: Karl's Plugins     Like this plugin? Show your appreciation!
Category: Hubs and Protocol Bridges
Github: Github Repo
Assistance: Get help!    Check the online documentation
Plugin ID: com.nathansheldon.indigoplugin.HueLights
Latest release: v2022.12.40 released on July 27, 2022
Release downloaded: 0 times
Requires: Indigo v2022.1.0 or higher
(Check the Releases tab below for older releases that may have different requirements)
  Download latest release

Hue Lights

Hue Lights is a plugin for Indigo which allows you to control your Philips Hue lights and Friends of Hue lights through the Indigo system. It allows you to perform basic operations like turning bulbs on and off, setting brightness, and setting the default dimming ramp rate. It also keeps the status of each bulb updated in Indigo so Indigo always knows the condition of each bulb even when the bulbs are controlled by the Hue iOS or Android apps. Additionally, Hue Lights enables advanced control of the Philips Hue devices, allowing you to set custom colors (using RGB, HSB, or color temperature), and the ability to turn on or off alerts (blinking) and effects (color loop).

Hue Lights offers the following features:

  • Supports multiple Hue Hubs.
  • Full Indigo Integration. Use standard Turn On, Turn Off, Set Brightness, Dim By, Brighten By, and Status Request actions in Indigo Pro to control each Philips Hue lighting device. • Start or Stop Brightening and Dimming. Use an Indigo action to start brightening or dimming a Hue device, then another action to stop. This can be useful if you want to press a button on a switch or remote to start dimming, then press another button to stop dimming when the light gets to the level you want. It can be even more useful when using the Dimmer Extender plugin to trigger brightening and dimming from INSTEON start brightening/dimming commands (something that can't currently be done with Indigo without a plugin).
  • Set Ramp Rates. Each Hue Lights action allows you to specify how quickly the light should change from it's current state to the settings you're specifying in the Indigo action using a "Ramp Rate" or transition time.
  • Set Colors. Use Indigo actions to set each Hue device to any color. There are 4 ways to set color. RGB levels (specify red, green, and blue levels similar to graphics editing software), HSB values (specify hue, saturation, and brightness similar to graphics editing software), and Color Temperature (set the white point of a bulb based on a Hue preset or your own color temperature, similar to digital camera white balance settings*). For advanced users, you can also specify the "xyY" chromaticity values. Each action can have a custom ramp rate (transition time) associated with it.
  • Use Virtual Dimmer Devices to Control Hue Device Settings. Use the Hue Device Attribute Controller device included with the Hue Lights plugin to control any aspect** of an existing Hue device, such as color saturation, hue, RGB level, or color temperature. These virtual dimmer devices can be especially useful when accessed from the Indigo Touch iOS app because they appear just like any other dimmer device within Indigo Touch. No need to create a control page or use the Hue app to adjust a device's hue or saturation.
  • Turn On and Off Alerts. You can turn on a short or long alert (1 blink for short, 15 blinks for long) for each device, and turn off the alert, also using Indigo actions.
  • Turn On and Off Effects. You can turn on Hue built-in special effects (currently, Hue only offers 1 effect: "color loop").
  • Save and Recall Your Own Presets. So, you've got your Hue bulb over the table set to just the right color, but now you want your LightStrips and LivingColors Bloom in the room to change to the same color. Either from the Plugins menu, or from within an Indigo action, you can save the current settings of your Hue bulb to one of 10 Presets then (in a separate menu selection/action) apply those settings to any other Hue device. From the Plugins menu, you can also print out the saved settings in each Preset to the Indigo log for reference or verification.
  • Extended Device Status Information. Each Hue device in Indigo also maintains all the status information provided by the Hue hub, including current hue and saturation levels, red, green, and blue levels, CIE 1931 xy chromaticity values, color temperature, color rendering mode, alert mode, effect mode, and whether the device is reachable by the hub. All this information can be viewed in the Mac OS X Indigo client (Indigo 6 beta 9 or newer), or on an Indigo control page you create with standard Indigo device state fields.
  • Hue Scene Recall Support. Hue scenes stored on the Hue hub are accessible from within Indigo and can be recalled using an Indigo action.
  • Motion Sensor Support. The Hue Motion Sensor is fully supported, including support for the motion, temperature and luminance sensors that are part of the Hue Motion Sensor.

Check out the wiki for a more complete description of how to use the plugin.

Release details
Released on: July 27, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release

added some more context when connection to hub bridge not is working

Release details
Released on: July 25, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release
  • fixed adding hue bridges, fixed a major issue
Release details
Released on: July 24, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release
  • added print option to print plugin prefs to logfile, for debugging purposes
  • added more logging info when connection to bridge is failing
  • fixed, during initialization: if conection to one bridge failed, all subsequent bridges were ignored
Release details
Released on: July 22, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release
  • beautifications in logging and menus

  • added one more check when adding a new bridge fixing error: plugin.py", line 2686, in selHubNumberGWPair

Release details
Released on: July 20, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release
  • fixed continuous logging for some sensors, even when nothing changed.
Release details
Released on: July 20, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release
  • fixed continuous logging for some sensors, even when nothing changed.
Release details
Released on: July 19, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release

2022.12.34 @ 2022-07-29

  • CHANGED # of state updates (online = false) for devices that are pysically w/o power from once every 5 secs to just once

  • FIXED: "line 7336, in parseOneHueSensorData if logChanges: self.indiLOG.log(20, "... was a bad ")" in format statement

  • ADDED menu option: "Delete Devices on Bridge..."" this will remove a hue devices from the bridge, not from Indigo

  • ADDED menu option: "Start Seach for new Devices on Bridge..." this will start the scan process on the bridge to look for new devices. the bridge will scan for 40 secs for new devices. This will not add devices to indigo, use menu "Add New Hue Devices in Indigo..." it will do about the same as the iphone hue app.

Release details
Released on: July 16, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release
  • ADDED support for Hue Rotary Wall Switch (4 Tap Switches w rotary ring) the most usefull dimmer in the Hue portfolio - In my opinion using types = ZLLRelativeRotary and ZLLswitch modelId = RDM002 it will create 2 indigo devices: hueRotaryWallSwitches (ZLLswitch) for the 4 buttons hueRotaryWallRing (ZLLRelativeRotary) for the ring to dimm lights on the hue bridge it is also 2 virtual devices

  • ADDED action & menu to dis(en)-able sensor devices (temp, motion, switches) this can be useful when you want to disable certain sensors at night or when you are out or at home this is done by setting element "config":{"on":true/false} on the bridge for the selected device you can see which sensors are on/off with report in menu/print hue config../sensors

  • ADDED menu option to rename devices on bridge you can change individual devices with free text or all and change the name on the bridge to the indigo device name !! max number of characters is 32 for names on bridge !! there is an option to drop the "Hue_bridge_id_"nameOnBridge prefix of indigo names on the bridge for devices generated using plugin/menu/Add new devices

  • ADDED option "Where to log device value changes" received from hue bridge either (1) in regular indigo log and plugin.log or (2) ONLY in plugin.log file in indigo log direcotry with this option you can declutter your normal indigo logfile from regular messsages reminder: ALL log messages are ALWAYS in the plugin.log file

  • ADDED option to print detailed tracking info for ONE specific Sensor or light to logfile this is useful to track the detailed behavior and logic in the plugin for ONE specific device when eg buttons are pressed

  • There are now various options to log device changes in plugin config

    • on for all devices
    • off for all
    • set in each device individually
    • log in indigo log and plugin.log or only in plugin.log file
    • set the default for each new device created
  • CHANGED state lastupdated is now local time, not UTC eg 2022-07-12 12:33:45 in stead of 2022-07-12T06:33:45 for USA east cost time zone that state is not the last time when an indigo state was updated, but when a new EVENT time stamp arrived

  • FIXED bug for "wall switch" devices status was not properly updated REMARK: The defined logic is not 100% correct. There are several modes (set on the bridge), ie when set to on/off on bridge the indigo state on/off only stays up for a few seconds. It should stay up as long as the button is pressed. This is also the case for all other switch sensors. This will only be corrected going from simple polling every 2 secs to async listening, BUT that is a major structural change for the plugin this will take some time

  • CHANGED: added debug statement for 'hubNumber' error

Release details
Released on: July 8, 2022
Requires: Indigo v2022.1.0+
Downloaded: 1 times 
Changes in this release

added debug statement for 'hubNumber' error

Release details
Released on: July 1, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release

fixed * on/off state and bright ness not properly updating for dimmable lamps * fixed on/offstate for all lamps made it consitent * fixed # of decimal point for RGB, White level, Color Temperature in indigo dev status display

Release details
Released on: June 26, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release

======================================== 2022.11.29 @ 2022-06-22 New functions: * added state "created". It shows date-time stamp of when device was created, or if it is empty put current stamp in, ie for old devices, as we don't know when they were created. this is only useful for new devices created after this release

  • added config option for default logging level(print received value updates to indigo log) for individual devices when they get auto created through "menu/create new devices...", which scannes all bridges and adds missing devices to indigo.

Improvements: * hue bridge adoption now semi-automatic in background in config after bridgeNumber and ip number confirmed it will try to pair/link to bridge and will show positive result in a popup window you still need to press the philips button on top of the bridge This way the plugin trys to link to the bridge every 5 seconds. It should succeeed as soon as you go to the bridge and press the button there. In case that process fails there is still the execute pair button in the config menu, which starts the paring process after you press the execute pair button

*streamlined device updates: instead of 10+ individual state updates, now it checks if there is a change in state value and then combines updates to a list. That should reduce server load from updates significantly

Fixes: * fixed some issues in print hue config menu

  • lots of little clean-up of typos etc
Release details
Released on: June 19, 2022
Requires: Indigo v2022.1.0+
Downloaded: 2 times 
Changes in this release

*extended expiration time for confirming bridge # to 120 secs (from 15 secs) that should deal with message bridge confirm popup error message Also now after successfull delete / change IP# and (re-)pair bridge the config menu goes back to first step: "Select action for the bridge"

Release details
Released on: June 4, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release

*fix bug: is not a dimmer device *restructured config menu to make it easier to understand for manaing bridges in config flow is now - select action (add(pair) / modify(IP) / delete) - select select bridge # - then set new Ip# .. - confirm with success / failure popup messages ==> should be easy to understand now

changed error logging to std python error logging *added code to check if devices are "orphaned" ie have no bridge or a non existing bridge associated * this version requires python3 ie only runs uder indigo 2022.1 and later *

Release details
Released on: June 2, 2022
Requires: Indigo v2022.1.0+
Downloaded: 0 times 
Changes in this release

*bug fix: auto create hue devices did not set rgb white etc properties correctly *bug fix: save preset error *minor menu text changes *in device light and group edit: - only current device is shown - if not created yet (=new dev) only NOT used hue devices (ie no indigo dev) are shown *additions to menu print hue info ie print hue dev but no corresponding indigo dev and visa versa, some more formatted info for other print xxx menu options
*made MANY more things table driven, not hard coded in plugin, ie supports-xx xx= batterylevel rgb, white, onoff, sensorvalue, is dimmerdevice etc. all is set in file supportedDevices.py *added functionality to scan network for hue bridges. this done in the backgroud every 5 minutes (using /usr/bin/dns-sd functionality ) the list of network scan found bridges is available in config when you want to add a new bridge in config you can ask to have the scan run immediately. if you already know the ipnumber of your bridge this is not needed, but the ip # field is filled out automatically

  • * this version now requires python3 ie only runs uder indigo 2022.1 and later * it might still work under py2 (earlier than indigo 2022.1) You need to change api version to 2.0 from 3.0 in info.plist, but no support for that
Release details
Released on: May 22, 2022
Requires: Indigo v7.0.2 thru v2022.1
Downloaded: 3 times 
Changes in this release

several bug fixes *config menu was rewritten, should make it much easier to setup / modify bridge settings etc reduces error messages if wrong parameters are set etc. *logging/debug toggle in menu and detailed logging selection in config *some language clarification in menus * still runs under indigo 2022.1 and earlier * if no other MAJOR bugs found, this should be the last version that uns under Python2 *

Release details
Released on: May 13, 2022
Requires: Indigo v7.0.2 thru v2022.1
Downloaded: 51 times 
Changes in this release

This will be the last release of the plugin for Indigo 2021.2 and earlier. It will also work on Indigo 2022.1, but most likely will not after that. The next version will be using the new 3.0 (Python 3) API introduced in 2022.1.

Release details
Released on: Feb. 25, 2022
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug where pre-version 1.8 Hue bridge preferences weren't migrated correctly to the new 1.8 version.
  • Fixed a bug that caused the plugin to crash when using the XYY color setting action.
  • Added option to switch logging on/off for events and light changes such as "Hue Lights received 'dimmer dining' ON button press with short release" and "Updated 'dining room ceiling' on to 11".
  • Fixed an error in doColorTemperature where not all arguments were converted during string formatting.
  • Fixed "This Hue connected device is already being controlled by..." error.
  • Fixed "unicode" object has no attribute "formate".[/list]

Special thanks to forum user kw123 for providing code fixing support.

Release details
Released on: Feb. 5, 2022
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for all light types without the need to update the plugin for every new model of light.
  • Added support for multiple Hue bridges.
  • Added Plugins menu option to print device details to the log

Special thanks to forum user kw123 for providing the code to support these new features.

Release details
Released on: Jan. 27, 2022
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another GLEDOPTO light strip controller
  • Added support for another Osram garden light pole.
  • Added support for another Hue color/ambiance bulb.
  • Added support for another Hue outdoor wall color light.
  • Added support for 2 new Hue color spot lights.
  • Added support for 2 new Hue dimmable lights.
Release details
Released on: Jan. 12, 2022
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Ikea FLOALT panel WS 60x60 color temperature LED panel.
  • Added support for 3 new Hue outdoor lights.
  • Added support for a new Hue color lamp.
Release details
Released on: Dec. 27, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for 2 new Hue outdoor Lily spotlights.
Release details
Released on: Dec. 8, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a 3A Smart Home DE on/off light switch.
  • Added support for another Hue White Candle bulb.
  • Added support for an eWeLink on/off plug.
  • Added support for an innr color/color temperature candle bulb.
Release details
Released on: Nov. 10, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a syntax error bug in version 1.7.60 that caused the plugin to crash during loading.
Release details
Released on: Nov. 10, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for 2 new Hue white/color lights.
  • Added support for 2 new Hue ambiance lights.
  • Added support for the Innr SP 220 plug.
Release details
Released on: Oct. 23, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue Still Ceiling light.
  • Added support for 2 new Hue color pendant lights.
  • Added support for a new Hue dimmable light.
Release details
Released on: Sept. 25, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Lightway/Megos E27 806 lumen bulb.
Release details
Released on: Sept. 13, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause continuous Indigo error messages if a motion sensor was disabled on the Hue bridge.
  • Added support for a new Hue ambiance candle bulb.
  • Added support for a Hue Aurelle panel.
Release details
Released on: Aug. 1, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Hue Signe floor light model.
  • Added support for an IKEA TRADFRI wall plug.
  • Added support for an innr A19 dimmable bulb.
Release details
Released on: June 14, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Hue Ambiance GU10 bulb model.
Release details
Released on: May 30, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed another bug that would cause an error if a light strip only supported color temperature.
Release details
Released on: May 24, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added compatibility with another Hue Amarant light.
Release details
Released on: May 16, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause an error if a light strip only supported color temperature.
Release details
Released on: April 30, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue Argenta color spot bulb.
  • Added support for an innr A19 color/color temperature bulb.
Release details
Released on: April 20, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause a state key error to appear in the Indigo log with Hue Wall Switch Module devices.
Release details
Released on: April 19, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new TRADFRI dimmable bulb.
  • Added support for an eWeLight full color/color temperature bulb.
  • Added support for the Hue Wall Switch module.
  • Added support for a new Hue ambiance downlight.
  • Added option to disable ON and OFF ramp rates (transition times) in lighting device configuration dialogs to help improve compatibility with non-Hue lights.
  • Fixed a bug that would cause the wrong color to be sent to a Hue Group when using the RGB picker in the Indigo UI.
Release details
Released on: April 7, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another GLEDOPTO color and color temperature light.
Release details
Released on: March 24, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue Single color table light.
  • Added support for a new Hue Dimmer Switch.
  • Added support for the Osram Smart + LED GU5.3 reflector.
  • Added support for 2m and 5m Hue Outdoor Lightstrips.
  • Added support for the Hue Amarant Wall Washer light.
  • Added support for the Hue white candle dimmable bulb.
Release details
Released on: March 7, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause an error when recalling a Hue scene if the scene creator had been deleted via the Hue web site (2nd attempt).
  • Fixed saving and recalling Presets to be compatible with Hue Group devices as both source and target for Preset data.
Release details
Released on: March 3, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Lidl Silvercrest On/Off Plug version.
  • Added support for another Hue outdoor wall floodlight.
  • Added support for another Hue Ambiance GU10 bulb.
  • Fixed a bug that would cause an error when recalling a Hue scene if the scene creator had been deleted via the Hue web site.
Release details
Released on: Feb. 6, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue color downlight (BR30)
  • Added support for a new GLEDOPTO color/color temperature light.
Release details
Released on: Jan. 12, 2021
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue Ambiance downlight.
  • Added support for a new Hue white dimmable light.
  • Added support for another GLEDOPTO color/color temperature light strip.
  • Added support for another GLEDOPTO color/color temperature bulb.
  • Added support for another Hue Smart Plug (Australia version).
Release details
Released on: Dec. 10, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new GLEDOPTO light.
  • Added support for an Ikea FLOALT 30x30 color temperature light panel
  • Added support for the Hue Gradient Lightstrip.
  • Added support for the Lidl smart plug.
  • Added support for the Lidl LivarnoLux Led color temperature bulb
Release details
Released on: Nov. 23, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed support for a Hue white and color GU10 bulb.
Release details
Released on: Nov. 22, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue white and color GU10 bulb.
Release details
Released on: Nov. 13, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue Play model.
  • Added support for 2 new GLEDOPTO lights.
  • Added support for the Hue Lily XL outdoor light.
  • Added support for new Hue White (dimming only) lights.
  • Fixed a bug with ambiance (color temperature only) lights that would cause an error if the White Level in the Indigo client was changed.
Release details
Released on: Oct. 29, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue LED filament bulb variant.
  • Added support for a new Hue Centura color downlight.
  • Added support for a new Hue Ambiance downlight.
Release details
Released on: Oct. 7, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause an error when attempting to select a Hue scene in the Recall Hue Scene dialog if the scene parameters on the Hue bridge don't include a corresponding scene creator (owner).
  • Added support for a new dimming-only Hue white lamp.
Release details
Released on: Sept. 19, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that caused a plugin error when recalling a Hue scene.
Release details
Released on: Sept. 12, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Quotra-Vision RGB + warm/cool white light strip.
  • Added support for version 4 of the Hue LightStrips Plus.
  • Added support for the Innr SP 224 on/off plug.
  • Added support for the IKEA TRADFRI E26 WW 806lm dimmable light.
Release details
Released on: Aug. 23, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that prevented the Set RGBW Levels Indigo action from working correctly.
  • Fixed a bug that prevented device states from being updated for the original Hue LightStrip on newer Hue bridge firmware.
Release details
Released on: June 14, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed support for the Adore Hue Ambiance Wall light.
  • Added support for another Hue White Ambiance bulb.
Release details
Released on: June 5, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Hue filament dimmable bulb.
  • Added support for the Adore Hue Ambiance Wall light.
  • Improved the native Indigo RGB and color temperature control implementation.
Release details
Released on: May 16, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would display an error in the Hue Device menu of the Save Preset and Recall Preset plugin menu dialog.
Release details
Released on: May 11, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Philips white/color bulb.
  • Added support for more Hue outdoor and floor lamps.
Release details
Released on: April 19, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Philips dimmable light.
  • Fixed a bug that displayed "True" or "False" as the on state for the Hue Smart Plug instead of "on" or "off".
  • Fixed a bug that would display an error saying the device doesn't support color temperature when attempting to create a Set Color Temperature action for a Hue Group device.
  • Fixed a bug that would always set the temperature scale to Celsius when creating a new Hue Motion Sensor device even if you selected Fahrenheit as the scale.
Release details
Released on: April 15, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Innr Flex Color 4 meter RGBW LED Strip.
  • Fixed a bug that prevented control of color channels in some GLEDOPTO LED controllers.
  • Fixed a bug that prevented the selection of Hue Groups in the Hue Attribute Controller device configuration window.
Release details
Released on: March 15, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause the plugin to crash when updating light strip devices that have no color capabilities.
Release details
Released on: March 12, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Müller-Licht (Aldi) ZBT color temperature light.
  • Added support for GLEDOPTO color light strip drivers.
  • Added support for Niko ZigBee switches.
  • Added support for the TRADFRI 10 watt LED driver. Moved the already supported TRADFRI 30 watt LED driver into the Light Strips device model.
  • Fixed a bug that would allow you to select a sensor or switch device as the target for a Hue Attribute Controller even though those devices can't be controlled.
  • Fixed light device menus in various device configuration windows so Hue light devices are listed in alphabetical order.
  • Fixed the group device menu in the Hue Group configuration window so the Hue Groups are listed in numerical group order rather than alphanumeric order.
Release details
Released on: Feb. 7, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Osram PAR-16 SMART+ Spot GU10 Multicolor 350lm light.
  • Added support for a Hue color wall light and Hue filament bulb.
Release details
Released on: Jan. 2, 2020
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue Smart Button.
  • Added a separate "Stop Brightening and Dimming" action to the available device actions.
Release details
Released on: Dec. 26, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause the plugin to crash when validating device configurations whose Hue device had non-ASCII compatible Unicode characters in the device name on the Hue bridge.
Release details
Released on: Dec. 24, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue white ambiance bulb (European model).
  • Added support for another IKEA color temperature E26 bulb.
Release details
Released on: Dec. 11, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Hue Smart Plug model variant.
  • Added support for a Hue white dimmable BR30 light.
  • Added support for an IKEA TRADFRI E12 and GU10 dimmable light.
Release details
Released on: Dec. 5, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue color B22 bulb.
  • Added support for a new Hue white bulb.
Release details
Released on: Dec. 1, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue GU10 version 2 bulb.
  • Added support for an IKEA dimmable 600 lumen E14 color bulb.
Release details
Released on: Nov. 20, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for an IKEA dimmable 1000 lumen E27 color temperature bulb.
  • Added support for an IKEA dimmable 600 lumen E14 color temperature bulb.
  • Added support for an IKEA dimmable 600 lumen E27 color LED bulb.
Release details
Released on: Nov. 15, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Philips A19 dimmable light.
Release details
Released on: Nov. 12, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue LED spiral filament ST64 bulb.
  • Added support for the on/off OSRAM Smart+ Plug.
  • Fixed plugin log issue that caused plugin log files to grow very large.
  • Fixed the Innr On/Off Plug-in module so it appears in the On/Off Devices. If you already have the module set up with Hue Lights in Indigo, you MUST edit the device in Indigo and redefine it, otherwise it won't work after updating to version 1.7.16.
Release details
Released on: Nov. 8, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a new Hue Ambiance E26 bulb.
  • Added support for a new Hue LED filament G93 globe bulb.
  • Added support for the UK variant of the Hue Smart Plug.
Release details
Released on: Nov. 1, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue LED filament ST19 Edison bulb and Hue LED filament G25 globe bulb.
Release details
Released on: Oct. 31, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for 2 new Hue dimming only GU10 lights.
Release details
Released on: Oct. 28, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for an Ikea dimmable 806 lumen E27 and dimmable 400 lumen E14 light.
Release details
Released on: Oct. 25, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue White PAR38 Outdoor light.
  • Added support for another Hue White Ambiance BR30 bulb.
  • Added support for another Feibit Inc. LED strip controller, branded as the 3A NUE ZigBee RGBW Light.
Release details
Released on: Sept. 22, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug with the Hue Smart Plug where current on/off state would not update.
  • Fixed a bug where using the Indigo's built-in Toggle On/Off action failed with dimmable Hue devices.
  • Added support for a new version of Hue color lamp.
Release details
Released on: Sept. 18, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug with Hue Group devices that prevented the Set Brightness with Ramp Rate action from working correctly.
Release details
Released on: Sept. 18, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug that would cause the Hue Smart Plug device states to never update.
Release details
Released on: Sept. 17, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue Outdoor Lucca light.
  • Added support for the Hue Smart Plug as a new On/Off device type.
Release details
Released on: July 12, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed bug that would cause errors if a motion sensor was disabled in the Hue bridge. The plugin will now show a "disabled" error state for sensors that are turned off on the Hue bridge.
Release details
Released on: May 29, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release

Added support for the Hue White PAR-38 flood light.

Release details
Released on: May 12, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Shortened sensor update interval to 1 second instead of 2 seconds.
  • Shortened lights and groups update interval to 5 seconds instead of 10.
  • Added support for the Innr RS-228T GU10 color temperature light.
Release details
Released on: March 31, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue Signe Floor light.
  • Added button hold states for the Run Less Wire switch device. Note that this feature is still experimental.
  • Fixed issue where Run Less Wire switch button ON states may not be saved.
Release details
Released on: March 27, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Fixed a bug with Run Less Wire switch support that would not allow you to select a Run Less Wire switch device in the device selection dialog.
  • Fixed a bug with Run Less Wire switch support that returned numerous errors when the plugin attempted to update the online state of the switch which has no online state.
  • Fixed a bug with Run Less Wire switch support that would not update switch states during initial plugin load.
Release details
Released on: March 26, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Run Less Wire switch.
  • Fixed a bug that would prevent Hue Tap switches from appearing in the device selection list.
Release details
Released on: March 25, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue Tap and Hue Dimmer Switches.
  • Changed all references to the "Hue hub" to "Hue bridge".
Release details
Released on: March 15, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for Hue Outdoor Motion Sensor.
  • Added support for another GLEDOPTO color LED light strip controller.
Release details
Released on: Jan. 28, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Innr RB-185C color and color temperature light.
  • Fixed a bug with the Hue Motion Sensor's Celsius temperature calculation that could cause constant "received ... sensor update" messages in the Indigo Event Log.
Release details
Released on: Jan. 19, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for a GLEDOPTO dimmable LED controller.
Release details
Released on: Jan. 5, 2019
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for another Hue Ambiance Ceiling light variant.
Release details
Released on: Dec. 16, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the IKEA dimmable 980 lumen E27 color temperature bulb.
Release details
Released on: Dec. 10, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Feibit Inc. LED strip controller.
Release details
Released on: Nov. 2, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the GLEDOPTO color/color temperature light strip.
  • Added support for the Hue Play color/color temperature light.
  • Fixed bug with existing support for GLEDOPTO generic ZigBee color temperature only light strip. It was previously part of the full color device group. It's now part of the Ambiance device group. This will require users to re-define the device in Indigo.
Release details
Released on: Oct. 25, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the IKEA dimmable 600 lumen E26 color LED bulb.
  • Fixed a bug (hopefully) that prevented Indigo from displaying color temperature sliders in the UI for Ambiance type Hue devices.
Release details
Released on: Oct. 15, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Dredesn Elektronik FLS-CT lp LED color temperature light.
  • Added support for a Generic ZigBee WW/CW light strip.
Release details
Released on: Oct. 5, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the ShenZhen Homa white and color LED light strip controller.
Release details
Released on: Oct. 1, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Osram PAR-16 GU10 Lightify light color light, Osram On/Off Plug and a second Hue outdoor LightStrips.
Release details
Released on: Sept. 29, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Hue LightStrips Outdoor.
Release details
Released on: Sept. 11, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release

Fixed a bug in the sensor device update function that could cause errors when updating motion sensor status in some situations.

Release details
Released on: Aug. 30, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release

Added support for the Hue outdoor lily spotlight and Hue outdoor pedestal light.

Release details
Released on: Aug. 9, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release

Added support for the Hue calla pathway bollard light.

Release details
Released on: July 13, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Osram Gardenpole Mini RGBW light.
Release details
Released on: June 18, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the Innr SP 120 On/Off Plugin module.
  • Added support for the IKEA 30x90 color temperature LED panel.
Release details
Released on: May 7, 2018
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for the IKEA 30 Watt dimmable LED transformer.
Release details
Released on: Nov. 20, 2017
Requires: Indigo v7.0.2 thru v2022.1
Changes in this release
  • Added support for all the latest Philips Hue light models listed in Hue API.
Requirements

Requires Indigo 7.0 or later.